NEW! Music in Full Color. Turn up with Polaroid Music.

polaroid logo mobile
How To

How to use the Polaroid Go camera.

1.

Turn on the Polaroid Go camera by pressing the ON | OFF button. The film counter display will show you how many photos you have left. It should be at ‘0’.

Image alt text

2.

Slide the film door button across and pull the door open.

Image alt text

3.

Match the color on the film cassette with the color indicated on the camera. Slide the thick end of the cassette in first and let it drop into place. Leave the pull tab on as you will need that later to remove the empty film pack.

Image alt text

4.

Close the film door until it clicks. The darkslide covered by the film shield will eject.

Image alt text

5.

Remove the darkslide and allow the film shield to roll back in.

Image alt text

6.

Aim at your subject and press the shutter button. The flash will trigger automatically. Be careful you don’t cover the flash with your finger.

Image alt text

7.

Try a selfie. The viewfinder has its own reflective selfie mirror. Place yourself in the middle of it then take the photo.

Image alt text

8.

The photo will eject underneath the film shield. Leave it there for 5 seconds. Then gently lift the film shield and let it roll back in. Remove the photo.

Image alt text

9.

Don’t shake the photo! Place your photo in a dark place or face down on a flat surface to shield it from light. Follow the development time on the film pack.

Image alt text

Get our latest updates and 10% off your first order